Epson LQ-860 - Impact Printer, User Manual

Page: 229 / 325

Problem
Solution
Using the cut sheet
feeder, the paper
does not feed
properly
(continued).
After a print command
The left and right paper guides may be
is
sent
from the
too close together, preventing smooth
computer, the platen
paper feed. Adjust the position of the
rotates, but paper does
paper guides so that the paper can move
not feed. The
PAPER
up and down freely. Check the envelope
OUT light is on
levers. They should be up for single sheets
(continued).
and
down
for envelopes. See Chapter 5.
Two
or more sheets
feed at
the
same time.
Paper may be jammed near the print
head. Remove the paper jam (temporarily
remove the cut sheet feeder if necessary).
You may have loaded too many sheets in
the cut sheet feeder’s bin. Remove the
sheets. The bin can hold up to 150 sheets.
There
may
be only
one sheet
left in the
bin.
The
last sheet in the bin may not feed,
so add more paper.
You may have loaded too many
sheets
in
the cut sheet feeder’s bin. Remove the
sheets. The bin can hold up to 150 sheets.
You may have forgotten to fan the stack
of paper before loading it into the bin.
Remove the paper and fan it. Then align
the edges of the stack. See Chapter 5.
Troubleshooting
7-29