Epson LQ-860 - Impact Printer, User Manual

Page: 226 / 325

Problem Solution
Switching between
single sheets and
continuous paper
cannot be
performed properly
(continued).
Even with the paper
release lever set
correctly to the single-
sheet position, the
single sheet and
continuous paper feed
together and jam.
The short tear-off
function does not
operate properly.
One page is completely
DIP switch 2-7, short tear-off mode, may
printed, but the paper
be set to off. Set DIP switch 2-7 to on to
does not feed.
turn on the short tear-off mode.
Printing ended in the
middle
of
a page.
One page of data may not have been sent
to the printer. Finish the page by sending
a form feed code (FF) to the printer or by
sending enough line feed codes (LF) to
advance the remainder of the page.
The continuous paper may not have fed
backward far enough to reach the standby
position before you changed the position
of the paper release lever. Remove the
jammed paper and try again. Also, check
that
the
PAPER OUT
light comes on before
changing the position of the paper release
lever to make sure that the continuous
paper is completely ejected. When there is
more than
one
page to eject, you must
press the LOAD/EJECT button more than
once. See Chapter 2.
7-26
Troubleshooting