Epson LQ 670 - B/W Dot-matrix Printer, User Manual

Page: 7 / 196

❑
Unplug the printer and refer servicing to qualified service
personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered the
printer; if the printer has been dropped or the cabinet damaged;
if the printer does not operate normally or exhibits a distinct change
in performance. Adjust only those controls that are covered by the
operating instructions.
❑
If you plan to use the printer in Germany, observe the following:
To provide adequate short-circuit protection and over-current
protection for this printer, the building installation must be
protected by a 16 Amp circuit breaker.
Bei Anschluß des Druckers an die Stromversorgung muß
sichergestellt werden, daß die Gebäudeinstallation mit einem
16 A-Überstromschalter abgesichert ist.
E
NERGY
S
TAR Compliance
As an
E
NERGY
S
TAR Partner, EPSON has determined
that this product meets the
E
NERGY
S
TAR guidelines
for energy efficiency.
The International
E
NERGY
S
TAR Office Equipment program is a
voluntary partnership with the computer and office equipment industry
to promote the introduction of energy-efficient personal computers,
monitors, printers, fax machines, and copiers in an effort to reduce air
pollution caused by power generation.
R
Adonis Rev.E
A5 size Front
97/04/15 pass 0
v