manualshive.com logo in svg

Epson FX-880 - Impact Printer, User Manual

The Epson FX-880 Impact Printer is a high-quality printing solution designed for reliable and efficient performance. For those seeking a user manual, our website offers a free download of the Epson FX-880 Service Manual, providing step-by-step instructions and insights. Simply visit manualshive.com to access this invaluable resource.

Share
Download
background image

Advancing paper to the tear-off position
automatically 

To automatically advance your printed documents to the
tear-off position, turn on the auto tear-off mode and select the
appropriate page length for continuous paper in the default
setting mode. When auto tear-off is on, the printer
automatically advances the paper to the tear-off position
whenever it receives a full page of data or a form feed
command followed by no more data. To enter the default-setting
mode, see “Making Default Settings” on page 5-3.

Adjusting the tear-off position 

If your paper’s perforation is not aligned with the tear-off edge, 
you can use the micro adjust feature to move the perforation to 
the tear-off position. Follow the steps below.

Note:

Your tear-off position setting remains in effect until you change it, even
if you turn off the printer.

1.

Make sure the 

Tear Off/Bin 

light is flashing (the paper 

is at the current tear-off position). You may need to press 
the 

Tear Off/Bin

 button to advance the paper to the tear-off

position.

            g3-22aa

L

Gentian

Rev.c

A5 size

Chapter 3

97/07/04

pass 2

3-28      

Printing on Continuous Paper 

Summary of Contents for FX-880 - Impact Printer




















































































































































































































Reviews:

No comments

Related manuals for FX-880 - Impact Printer

Canon Pixma MG2400 Series Manual preview
Pixma MG2400 Series
Brand: Canon Pages: 2
Xerox 5700 Series Manual preview
5700 Series
Brand: Xerox Pages: 25
Datecs PP-55 User Manual preview
PP-55
Brand: Datecs Pages: 73
Datamax H-Class Quick Start Manual preview
H-Class
Brand: Datamax Pages: 12
Datamax E-Class Mark II Maintenance Manual preview
E-Class Mark II
Brand: Datamax Pages: 40
Datamax E-class E-3202 Quick Reference Manual preview
E-class E-3202
Brand: Datamax Pages: 46
Oki C911dn Mode D'Emploi preview
C911dn
Brand: Oki Pages: 147
Oki C9600 Series Printing Manual preview
C9600 Series
Brand: Oki Pages: 12
Oki C911 DICOM Maintenance Manual preview
C911 DICOM
Brand: Oki Pages: 297
Oki C9000 Series Printing Manual preview
C9000 Series
Brand: Oki Pages: 111
Oki C9000 Series Brochure & Specs preview
C9000 Series
Brand: Oki Pages: 6
Oki C5510n MFP Specifications preview
C5510n MFP
Brand: Oki Pages: 2
Oki C6000dn Handy Reference preview
C6000dn
Brand: Oki Pages: 108
Oki C5800Ldn Series Guía Del Usuario preview
C5800Ldn Series
Brand: Oki Pages: 266
Oki C5800Ldn Series Manual Do Utilizador preview
C5800Ldn Series
Brand: Oki Pages: 276
Oki C5500n Series Network User'S Manual preview
C5500n Series
Brand: Oki Pages: 121
Oki C9300 Series Setup Manual preview
C9300 Series
Brand: Oki Pages: 12
Oki C5400 Series Manuel preview
C5400 Series
Brand: Oki Pages: 354

Brands by name

Popular brands

Load more brands