Epson FX-880 - Impact Printer, User Manual

Page: 153 / 211

Printing or printout quality problems
The printer does not print when the computer sends data.
Cause What to do
The printer may be paused. Press the Pause button to turn off the
Pause light.
The interface cable is not
plugged in securely. Check that both ends of the cable
between the printer and the computer
are plugged in securely. If the cable is
connected correctly, run a self test as
described later in this chapter.
Your interface cable does not
meet the printer and/or
computer specifications. Use an interface cable that meets the
requirements of both the printer and
computer. See page 1-11 and your
computer documentation.
Your software is not properly
set up for your printer. Select your printer from the Windows
desktop or in your application. If
necessary, install or reinstall the
printer driver software as described in
Chapter 2.
The printer makes noise, but nothing prints or printing stops
abruptly.
Cause What to do
The paper thickness lever is
set incorrectly. Set the paper thickness lever to match
the thickness of your paper. See
“Setting the Paper Thickness Lever” in
Chapter 3.
The ribbon has too much
slack, the ribbon has come
loose, or the ribbon cartridge
is not installed properly. Remove any slack in the ribbon by
turning the ribbon-tightening knob,
or reinstall the ribbon cartridge as
described in Chapter 1.
8
Tr
ou
b
les
h
o
ot
in
g
R
Gentian Rev.c
A5 size Chapter 8
97/06/20 pass 1
Troubleshooting
8-9