Appendix A
Command Summary
This appendix lists and describes all the commands, both Epson
(ESC/P) mode and IBM printer emulation mode, available on the FX.
The first part of this appendix lists all commands in numerical order
and gives the page number where each is fully described. If you know
which command you are looking for, consult the numerical list to find
the page number where it is described.
The Quick Reference card at the end of the book also contains a list
of the commands divided by topic, with page number references that
direct you to full explanations of the commands. The numerical list
and the Quick Reference card also show the differences between the
Epson mode and the IBM printer emulation mode.
The second part of this appendix lists and describes Epson mode
commands and IBM printer emulation mode commands separately; the
commands are divided into the following subjects:
Printer Operation
Data Control
Vertical Motion
Horizontal Motion
Overall Printing Style
Print Size
Print Enhancement
Word Processing
Character Sets
User-defined Characters
Graphics
Each command has a format section and a comment section. The
format section gives the ASCII, decimal, and hexadecimal values for
the command; the comment section describes the effect of the
command and gives any additional information necessary for using it.
All three formats are equivalent, and it should be easy to pick the
one most suited to your purpose.
Note
Some application programs can use control key sequences. See the
Control Key chart on page A-3 for information on using these.
Command Summary
A . 1
