6. Fit the right side of the paper into the right holder, moving the
holder as needed to match the width of the paper.
7. Close the right cover, making sure the paper has no dips or wrinkles
and lock the right holder in place.
Now that you have loaded the continuous-feed paper, prepare the
printer for printing.
1. Push the paper bail lever back.
2. Hold the paper guide above the printer with the edge tab on the
left. Insert the right hinge tab into the right tab slot, as shown in
Figure 1-10. Then insert the left tab into the left slot and push
the guide back so that it is horizontal.
Figure 1-10
This guide keeps paper that is coming out of the printer from
interfering with the paper going in. The guide is also used in the
upright position for printing on single sheets of paper.
1-10
Setting Up Your FX Printer
