Another mode for headings and other special uses is double-high,
which is shown below.
This is double high printing
Because of its height you must leave a blank line above a line of
double-high. Otherwise the double-high letters will overlap the letters
on the previous line.
Pica and elite can be reduced to about 60% of their normal width
with the condensed mode. This mode is particularly useful for printing
wide spreadsheets because condensed elite allows you up to 160
characters on an B-inch line and 272 on a 13½-inch line.
Condensed can be selected with SelecType, by setting a DIP switch
(see Appendix D), or with a software command. Even if you turn
condensed on with the DIP switch, you can still turn it off with
SelecType or the software command.
Condensed pica gives more characters on a line.
Condensed elite gives you even more.
Widening or narrowing the characters also widens or narrows the
spaces between words and letters. Because word processors usually
create a left margin by printing spaces, you may need to change the
number of characters on a line to keep the margins correct if you
change widths. For example, a left margin of five pica characters is the
same as one of six elite characters.
Special Effects and Emphasis
The FX offers two ways of emphasizing parts of your text and also
allows you to use underlining, superscripts, and subscripts. These
features can be controlled only by software commands, but many
application programs can produce them if they are properly installed.
Emphasized and double-strike modes both slow the printer down
slightly to produce bolder text. In emphasized mode, the FX prints
each character twice as the print head moves across the paper, with the
second slightly to the right of the first. This produces darker, more
fully-formed characters.
FX Printer Features
4-3
