G
After you finish settings, press the
Menu
(
Pitch
and
Tear Off/Bin
) buttons.
The
Menu
lights (both of the
Tear Off/Bin
lights) turn off and the printer exits the default-setting mode.
The settings you made is saved as new value.
Note:
If you turn off the printer prior to exiting default-setting mode, any changes you may have made are canceled and not
saved.
Restoring the Security Function Using Web Config
You can disable the function if you can access the device from the computer.
Disabling IPsec/IP Filtering Using Web Config
A
Access Web Config and select
Network Security Settings
>
IPsec/IP Filtering
>
Basic
.
B
Select
Disable
for
IPsec/IP Filtering
in
Default Policy
.
C
Click
Next
, and then clear
Enable this Group Policy
for all group policies.
D
Click
OK
.
Related Information
&
“Accessing Web Config” on page 20
Problems Using Network Security Features
Forgot a Pre–shared Key
Configure the key again using Web Config.
To change the key, access Web Config and select
Network Security Settings
>
IPsec/IP Filtering
>
Basic
>
Default
Policy
or
Group Policy
.
Related Information
&
“Accessing Web Config” on page 20
Cannot Communicate with IPsec Communication
Are you using an unsupported algorithm for the computer settings?
The printer supports the following algorithms.
FX-890IIN/FX-2190IIN/FX-2175IIN Network Guide
Solving Problems
54
