Items
Settings and Explanation
Access Control
Configure a control method for traffic of IP packets.
Permit Access
Select this to permit configured IP packets to pass
through.
Refuse Access
Select this to refuse configured IP packets to pass
through.
IPsec
Select this to permit configured IPsec packets to pass
through.
Local Address(Printer)
Select an IPv4 address or IPv6 address that matches your network environment. If an
IP address is assigned automatically, you can select
Use auto-obtained IPv4 ad-
dress
.
Remote Address(Host)
Enter a device's IP address to control access. The IP address must be between 0 and
43 characters. If you do not enter an IP address, all addresses are controlled.
Note:
If an IP address is assigned automatically (e.g. assigned by DHCP), the connection
may be unavailable. Configure a static IP address.
Method of Choosing Port
Select a method to specify ports.
Service Name
If you select
Service Name
for
Method of Choosing Port
, select an option.
Transport Protocol
If you select
Port Number
for
Method of Choosing Port
, you need to configure an
encapsulation mode.
Any Protocol
Select this to control all protocol types.
TCP
Select this to control data for unicast.
UDP
Select this to control data for broadcast and multicast.
ICMPv4
Select this to control ping command.
Local Port
If you select
Port Number
for
Method of Choosing Port
and if you select
TCP
or
UDP
for
Transport Protocol
, enter port numbers to control receiving packets,
separating them with commas. You can enter 10 port numbers at the maximum.
Example: 20,80,119,5220
If you do not enter a port number, all ports are controlled.
Remote Port
If you select
Port Number
for
Method of Choosing Port
and if you select
TCP
or
UDP
for
Transport Protocol
, enter port numbers to control sending packets, sep-
arating them with commas. You can enter 10 port numbers at the maximum.
Example: 25,80,143,5220
If you do not enter a port number, all ports are controlled.
Authentication Method
If you select
IPsec
for
Access Control
, select an option.
Pre-Shared Key
Enter a pre-shared key between 1 and 127 characters.
Confirm Pre-Shared Key
Enter the key you configured for confirmation.
FX-890IIN/FX-2190IIN/FX-2175IIN Network Guide
Security Settings
43
