Epson FILMSCAN 200, Service Manual

Page: 39 / 100

FilmScan 200
Rev. A
2-6
2.1.3 Film Carrier or APS Holder Selection
The scanner is available to load either the film carrier for 35 mm film or the APS holder for APS negative
film cartridge.
2.1.3.1 Front Panel Unit Face Change
The front panel unit has two different faces by the positioning of the cover (Refer to Figures 2-10 and 2-
11.). It is switched either film carrier or optional APS holder is installed to the scanner, and the status is
monitored by two switches. Refer to Table 2-1.
Film Type Cover Status Micro Switch B Status Micro Switch A Status
Film Carrier Close Close Inactive
APS Holder Open
(Press and hold the button
while pushing the door down
until it clicks into place.) Open APS holder is installed:
Close
APS holder isn’t installed:
Open
* Refer to Figure 2-12.
Button
Micro Switch B
(open)
Cover
APS Holder
Front Panel Unit
Figure 2-11. Front Panel Unit Status
(APS Holder)
Micro Switch B (close)
Film Carrier
Cover
Front Panel Unit
Figure 2-10. Front Panel Unit Status
(Film Carrier)
Table 2-1. Film Type and Switch Status