105
Parent topic:
Checking the Nozzles Using the Product Buttons
You can check the print head nozzles using the buttons on your product.
1.
Press the
power button to turn the product off.
2.
Load a few sheets of plain paper in the product.
3.
Hold down the
stop button and press the
power button to turn the product on.
4.
When the product turns on, release both buttons.
The product begins printing a nozzle check pattern.
Note:
It can take a few seconds for the nozzle check to start printing. If the nozzle check does not
start printing after a few seconds, make sure there is paper loaded in the printer.
5.
Check the printed pattern to see if there are gaps in the lines.
Print head is clean
Print head needs cleaning
6.
If there are no gaps, the print head is clean and you can continue printing.
If there are gaps or the pattern is faint, clean the print head.
Summary of Contents for Expression ET-2700 EcoTank
