Epson EX30, User Manual

Page: 31 / 118

Setting Up the Projector
31
Connecting a Component Video Source
If your video equipment has component video connectors (three
connectors labeled either Y/Cb/Cr or Y/Pb/Pr), you can use the
component-toVGA video adapter that came with your projector
(EX30 or EX50 only) and a component video cable, or purchase a
component-to-VGA video cable from Epson (see page 12) or an
electronics dealer.
1. Connect the component end of the cable to the Y/Cb/Cr (or
Y/Pb/Pr) connectors on your player.
2. Connect the other end of the cable to the
Computer
(Component Video)
port on your projector.
3. You may need to change the
Input Signal
setting in the
projector’s Signal menu to
Auto
(see page 64).
4. If you want to play sound through the projector, see page 34 for
instructions on connecting an audio cable.
When you’ve finished making connections, see page 37 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
Computer (Component
Video) port
EX30/EX50
EX70