C O N F I D E N T I A L
Paper roll
Usable application programs and tips
Ver. 4.0
p. 949
<
ESC d
: Print and feed
n
lines>
The command is used to feed paper continuously. The printing result is the same as when
transmitting
LF
n
times continuously. Using
ESC d
enables you to feed paper smoothly and to shorten paper
feed time, since
LF
is used for repeating one line paper feed
n
times. However,
ESC d
is used to feed paper
for
n
lines.
<
ESC J
: Print and feed paper>
This command is used to adjust line spacing.
ESC J
n
has the same printing result as when transmitting
LF
after setting line spacing with
ESC 3
. If you use [
ESC 3
+
LF
], you need to reset line spacing when printing
the next line. If you use
ESC J
, the current line spacing is not changed and it is possible to print the next line
without resetting the line spacing.
<Other print commands>
Special print commands are shown below: Some printers support the commands.
■
ESC K
or
ESC e
is used to feed paper in the reverse direction.
■
FF
or
ESC FF
is used to print page mode data.
■
FF
or
GS FF
is used to print a label.