Accessing Your System
If you have forgotten your current password, follow these steps
to access your system:
1.
2.
Turn off the computer.
Follow the instructions under “Changing the Jumper
Settings” in Chapter 2 to disable the password function by
setting jumper J13 to position A.
3.
4.
Turn on the computer.
When you see
Press
<F2> to run SETUP, press
You see the SETUP screen. If you do not want to set a new
password, go to step 6. If you want to set a new password,
go to step 5.
5.
To set a new password, highlight
Password
and press
Then press
Type a new password at the prompt and
press
You must enter the new password twice. (See
Chapter 2 of the Setup Guide for more information about
setting a password.) Now go to step 7.
6.
To disable password checking, highlight Password
security and press
Then press
or
to
change the setting to not installed. (See Chapter 2 of
the Setup Guide
for more information.)
7.
Save your settings as you exit SETUP. (See Chapter 2 of the
Setup Guide
for instructions.)
8.
Turn off the computer.
9.
Follow the instructions under “Changing the Jumper
Settings” in Chapter 2 to enable the password function by
setting jumper J13 to position B.
6-10 Troubleshooting
Summary of Contents for Equity 4
Page 1: ...EPSON User s Guide ...
Page 2: ...FCC COMPLIANCE STATEMENT FOR AMERICAN USERS ...
Page 12: ...Glossary index xi ...
