manualshive.com logo in svg

Epson Equity 4, User Manual

Introducing the Epson Equity 4, a versatile and powerful device designed to enhance your productivity. Access the comprehensive User Manual, available for free download at manualshive.com, to unlock all the features and functionalities. Discover endless possibilities and maximize your experience with this user-friendly manual, tailored just for you.

Share
Download
background image

Entering the ESPEED command in a batch file

You may want to run the ESPEED program by including the

command in a batch file. For example, let’s say you have a

program called SLOWDOWN which requires a slower

processor speed. You could include the following commands in

a batch file to start the SLOWDOWN program:

 

You could name the batch file SLOW.BAT. Whenever you need

to run the SLOWDOWN program, type 

SLOW

 

and press 

The computer changes the processor speed to automatic and

starts the program.

Preparing the Hard Disk for Moving

If you need to move your computer to a new location, you may

want to run the HDSIT program provided on your Reference

diskette to protect the hard disk during the move.

HDSIT moves (or parks) the disk drive’s read/write heads to a

region on the disk surface that does not contain data, and locks

them securely in position. This protects the hard disk from

being damaged if the computer is bumped accidentally.

Many hard disk drives, including all Epson drives,

automatically park their heads when you turn off the computer.

If your hard disk drive does not do this, or if you are not sure

that it does, be sure to run HDSIT.

If you have not already done so, copy the HDSIT.COM and

HDSIT.VER files from the Reference diskette to the root

directory on your hard disk. Then, when you want to run

HDSIT, type HDSIT and press 

Using Your Computer

1-33

Summary of Contents for Equity 4







































































































































































































Reviews:

No comments

Related manuals for Equity 4

Sun Microsystems SPARC classic X Service Manual preview
SPARC classic X
Brand: Sun Microsystems Pages: 198
Neoware eon 5000 Series User Manual preview
eon 5000 Series
Brand: Neoware Pages: 40
Elo TouchSystems B-series Quick Installation Manual preview
B-series
Brand: Elo TouchSystems Pages: 3
Lakeside Industries alto MD 250 Instruction Manual preview
alto MD 250
Brand: Lakeside Industries Pages: 26
Siemens Nixdorf SCENIC H Technical Manual preview
SCENIC H
Brand: Siemens Nixdorf Pages: 26
Sony VPCEL15FX VAIO Specifications preview
VPCEL15FX VAIO
Brand: Sony Pages: 3
Sony VGX-TP25E - Vaio Tp Series Living Room Pc Specifications preview
VGX-TP25E - Vaio Tp Series Living Room Pc
Brand: Sony Pages: 2
Sony VGX-TP20EW - Vaio Tp Series Living Room Pc Specifications preview
VGX-TP20EW - Vaio Tp Series Living Room Pc
Brand: Sony Pages: 2
Sony VGX-TP20EB - Vaio Tp Series Living Room Pc Specifications preview
VGX-TP20EB - Vaio Tp Series Living Room Pc
Brand: Sony Pages: 2
Sony VGNFW140D Specifications preview
VGNFW140D
Brand: Sony Pages: 2
Sony VGN-UX230P - VAIO UX Series Micro PC Specifications preview
VGN-UX230P - VAIO UX Series Micro PC
Brand: Sony Pages: 2
Sony VGN-U750P VAIO Specifications preview
VGN-U750P VAIO
Brand: Sony Pages: 1
Sony VPCCA Series Safety Information Manual preview
VPCCA Series
Brand: Sony Pages: 24
Sony VGN-T240P VAIO Specifications preview
VGN-T240P VAIO
Brand: Sony Pages: 1
Sony VGN-U71P Service Manual preview
VGN-U71P
Brand: Sony Pages: 22
Sony VGN-TX3HP/W Service Manual preview
VGN-TX3HP/W
Brand: Sony Pages: 79
Sony VGX-XL301 User Manual preview
VGX-XL301
Brand: Sony Pages: 141
Sony VGN-U750P VAIO Read This First Manual preview
VGN-U750P VAIO
Brand: Sony Pages: 142

Brands by name

Popular brands

Load more brands