170
Using the Control Panel
Sets the default font number for the default font source. The
available number depends on the settings you made.
Pitch
Specifies the default font pitch if the font is scalable and of
fixed-pitch. You can select from
0.44
to
99.99
cpi (characters per
inch), in 0.01-cpi increments. This item may not appear depending
on the Font Source or Font Number settings.
Height
Specifies the default font height if the font is scalable and
proportional. You can select from
4.00
to
999.75
points, in
0.25-point increments. This item may not appear depending on
the Font Source or Font Number settings.
SymSet
Selects the default symbol set. If the font you selected in Font
Source and Font Number is not available in the new SymSet
setting, the Font Source and the Font Number settings are
automatically replaced with the default value,
IBM-US
.
Form
Selects the number of lines for the selected paper size and
orientation. This also causes a line spacing (VMI) change, and the
new VMI value is stored in the printer. This means that later
changes in the Page Size or Orientation settings cause changes in
the
Form
value, based on the stored VMI.
CR Function, LF Function
These functions are included for users of particular operating
systems, such as UNIX.
Tray Assign
Summary of Contents for EPL-N2550
Page 1: ...User s Guide NPD1962 00 ...
