136
Using the PostScript Printer Driver
Using online help
If you want help on a particular item, click the “?” icon on the
top-right corner of the dialog box’s title bar, then click the name
of the setting that you want more information on. An explanation
of the setting and its options will be displayed.
Notice for Windows Me or 98 Users
The printer may not print normally if the computer is connected
to the printer via the parallel interface and the ECP mode is set. If
this is the case, disable bi-directional support in the printer driver.
To do so, display the printer’s Properties dialog box, click the
Details
tab, then click
Spool Settings
. In the Spool Settings dialog
box that appears, Select
Disable bi-directional support for this
printer
, then click
OK
.
Using AppleTalk under Windows 2000
Use the following settings if your machine is running Windows
2000, and the printer is connected through an network interface
using the AppleTalk protocol:
❏
Use SelecType to set the Emulation Mode-Network item to
PS3
. Using the default
Auto
setting will cause an extra,
unneeded page to be printed.
❏
On the
Device Settings
sheet of the printer’s Properties
dialog box, make sure that
SEND CTRL-D Before Each Job
and
SEND CTRL-D After Each Job
are set to
No
.
❏
TBCP (Tagged binary communications protocol) cannot be
used as the
Output Protocol
setting.
❏
On the
Job Settings
sheet of the printer’s Properties dialog
box, make sure to clear the
Job Management On
check box.
Summary of Contents for EPL-N2550
Page 1: ...User s Guide NPD1962 00 ...
