Epson EPL-N2550 User Manual Download Page 113

Page: 113 / 339

Using the Printer Software with Windows

113

Follow the steps below to set a Windows XP, 2000, or Server 2003
as a print server, then install the additional drivers.

Note:

You must access Windows XP, 2000, or Server 2003 as the
Administrators of the local machine.

1. For a Windows 2000 print server, click

Start

, point to

Settings

then click

Printers

For a Windows XP or Server 2003 print server, click

Start

point to

Printers and Faxes

2. Right-click your printer’s icon, then click

Sharing

in the menu

that appears.

For Windows XP or Server 2003, if the following menu
appears, click either

Network Setup Wizard

If you

understand the security risks but want to share printers
without running the wizard, click here

In either case, follow the on-screen instructions.

Summary of Contents for EPL-N2550




















































































































































































































































































































































Search results

Summary of Contents for EPL-N2550

Reviews:

Related manuals for EPL-N2550

Brands by name

Popular brands

Epson EPL-N2550, User Manual

Search results

Summary of Contents for EPL-N2550

Reviews:

Related manuals for EPL-N2550

Brands by name

Popular brands