Epson EPL-5900L Reference Manual Download Page 76

Page: 76 / 192

Sharing Your Printer

6. According to the message, type the appropriate drive and

folder names in which the printer driver for clients is located,
then click

Depending on the client’s OS, the displayed message may
differ.

The folder name differs depending on the OS being used.

When installing drivers in Windows 2000, “Digital Signature
is not found.” may appear. Click

Yes

and continue installing.

7. When installing in Windows 2000, click

. When

installing in Windows NT 4.0, the property window closes
automatically.

Note:

Confirm the following items when sharing the printer.

❏

Be sure to set the EPSON Status Monitor 3 so that the shared
printer can be monitored on the printer server. See “Monitoring
your printer (EPSON Status Monitor 3)” on page 34.

Client’s OS

Folder Name

Windows Me/98/95

WIN9X

Windows NT 4.0

WINNT40

Summary of Contents for EPL-5900L

































































































































































































Search results

Summary of Contents for EPL-5900L

Reviews:

Brands by name

Popular brands

Epson EPL-5900L, Reference Manual

Search results

Summary of Contents for EPL-5900L

Reviews:

Brands by name

Popular brands