Epson EPL-5900L Reference Manual Download Page 75

Page: 75 / 192

Sharing Your Printer

Select Windows being used for clients, then click

. For

example, select

Intel Windows 95 or 98

to install the

additional driver for the Windows Me/98/95 clients.
Select

Intel Windows NT 4.0 or 2000

to install the additional

driver for the Windows NT 4.0 clients.

Note:

❏

You do not have to install the additional driver for

Intel

Windows 2000

only, because that driver is preinstalled.

❏

Do not select additional drivers other than

Intel Windows 95

or 98

and

Intel Windows NT 4.0 or 2000

. The other

additional drivers are not available.

5. When the prompt appears, insert the CD-ROM that comes

with your printer in your CD-ROM drive, then click

Summary of Contents for EPL-5900L

































































































































































































Search results

Summary of Contents for EPL-5900L

Reviews:

Related manuals for EPL-5900L

Brands by name

Popular brands

Epson EPL-5900L, Reference Manual

Search results

Summary of Contents for EPL-5900L

Reviews:

Related manuals for EPL-5900L

Brands by name

Popular brands