manualshive.com logo in svg

Epson EMP-830, User Manual

Share
Download
Epson EMP-830 User Manual Download Page 75

74

Adjusting Projected Images Manually

User’s Guide

Adjusting Computer Images

Automatic setup detects analogue RGB signals coming from a computer 
connected by a computer cable, and automatically adjusts these signals so 
that the optimum images can be obtained.
The default setting for the automatic setup function is "ON", but if the 
images are not displayed correctly or if "Signal" - "Auto Setup" in the 
configuration menu is set to "OFF", press the [Auto] button on the remote 
control or the [Enter] button on the projector's control panel while 
computer (analogue-RGB) images are being projected to adjust the 
images.

Automatic setup involves adjustment of the following three items: 

Tracking

g

, Position and 

Sync

g

. If the "Contrast" configuration menu has 

been set to "Manual", it will change to "Auto".

Automatic Setup

Remote control

Projector

TIP

• If you press the [Auto] button on the remote control or the [Enter] 

button on the projector's control panel while the E-Zoom function or 
Freeze function is active, the active function will be cancelled and 
then the adjustment will be carried out.

• Sometimes the signals may not be adjusted correctly depending on 

the type of signals being output by the computer. In such cases, use 
the "Tracking", "Position" and "Sync." menu commands to make 
the adjustments manually. 

s

p.38

, 

p.75

, 

p.76

• Automatic setup is not carried out while the preview function is 

being used.

Summary of Contents for EMP-830














































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands