60
Functions for Enhancing Projection
User’s Guide
Preset Function
While projecting analogue RGB images from a computer connected via a
computer cable, you can store the following settings in the configuration
menu.
• All items in the "Image" menu
• All items in the "Signal" menu except for "Computer1 Input" and
"Computer2 Input"
If settings are stored for signals with different resolutions and frequencies,
the preset values can be applied to the analogue RGB signals that are
currently being projected simply by pressing the [Preset] button on the
remote control.
Up to five groups of the settings can be stored.
PROCEDURE
Press the [Menu] button on either the remote control
or the projector's control panel, and then select
"Image" or "Signal" from the configuration menu. The
mode for storing setting details will then be enabled.
s
,
Once the settings are complete, select "Preset" from
the "Signal" menu and then press the [Enter] button
on either the remote control or the projector's control
panel.
Select a preset number (1 to 5).
Storing Setting Values
1
2
3
TIP
The preset numbers that have an input resolution displayed have
already been set. If you select a preset number that has already been
set and use it to save the current settings, the existing settings in that
recording area will be overwritten.
Summary of Contents for EMP-830
Page 1: ...User s Guide ...
