65
Functions for Enhancing Projection
User’s Guide
Use the [
] button on the remote control or the [
]
or [
] button on the projector's control panel to
select the desired ID number (1–9).
Press the [Enter] button on either the remote control or the
projector's control panel to accept the ID number setting.
Once the setting has been made, press the [Menu]
button to close the configuration menu.
When registration is complete, only signals from remote
controls with the same ID number or an ID number of "0" can
be received.
PROCEDURE
Press the [ID] button.
The [ID] button will light.
Press a button from [0] to [9] to specify an ID number.
The light for the [ID] button will turn off and the registration
will be complete. If a number other than "0" is registered, the
remote control will only be able to operate projectors that have
the same ID number.
2
3
Registering an ID Number for a Remote Control
1
Remote control
2
Remote control
Summary of Contents for EMP-830
Page 1: ...User s Guide ...
