Epson EMP-30, User Manual

Page: 42 / 68

When the Indicators Provide No Help
40
Has the volume been adjusted to the
minimum setting? Adjust the volume so that the sound is audible.
"Audio" - "Volume" (p.23)
Is A/V Mute mode active?
Press the [A/V Mute] button on the remote control
to cancel the A/V Mute mode. (p.29)
Condition
The remote control does not work
Probable cause Remedy
Is the remote control light-emitting area
facing towards the remote control light-
receiving area when it is operated?
The operating angle for the remote control is
approximately ±30º horizontally and approximately
±15º vertically. Use the remote control within these
ranges. (Setup Guide)
Is the remote control too far from the
projector?
The operating distance for the remote control is
approximately 6 m (20 ft.). Use the remote control
within this distance. (Setup Guide)
Is direct sunlight or strong light from
fluorescent lamps shining onto the remote
control light-receiving area?
Avoid using projector in places where the remote
control light-receiving area is exposed to strong
light.
Has the battery insulating tape been
removed?
When using the remote control for the first time,
pull out the insulating tape that
is protruding from
the battery holder.
(Setup Guide)
Is the battery inserted? Insert the battery. (p.45)
Is the battery spent?
Replace the battery with a new one. (p.45)
Is the battery inserted incorrectly?
Reinsert the battery so that it faces correctly. (p.45)
Condition
The power does not turn off (after the [Power] button is
pressed)
Probable cause Remedy
The Power indicator remains orange.
This projector is designed so that the Power
indicator remains lit even when after the power has
been turned off.
The Power indicator will switch off when the power
cable is disconnected from the electrical outlet.
Probable cause Remedy
S-Video/Video Computer
Menu A/V Mute
E-Zoom
Freeze
Color Mode
Power
ESC Auto
Enter