Epson EMP-30, User Manual

Page: 46 / 68

44
Maintenance
This section describes maintenance tasks such as cleaning the projector and replacing consumable parts.
You should clean the projector if it becomes dirty or if the quality of projected images starts to deteriorate.
Clean the projector case by wiping it gently with a soft cloth.
If the projector is particularly dirty, moisten the cloth with water containing a small amount of neutral
detergent, and then firmly wring the cloth dry before using it to wipe the projector case. Then wipe the case
again with a soft, dry cloth.
Use a commercially-available air blower, or use lens cleaning paper to gently wipe the lens and the EPSON
cinema filter.
If the air filter becomes clogged with dust, it can cause overheating and damage the projector.
Turn the projector upside down and use a vacuum cleaner to remove the dust from the air filter
Cleaning
Cleaning the Projector Case
Cleaning the Lens and EPSON Cinema Filter
Cleaning the Air Filter
••••
If the air filter is difficult to clean or if it is broken,
it should be replaced. Contact your dealer for a
spare air filter.
••••
Spare lamps are provided with a spare air filter.
The air filter should also be replaced when the
lamp is replaced. (p.50)
Be sure to read the separate
Safety Instructions/World-Wide Warranty Terms before
cleaning.
Do not use volatile substances such as wax, alcohol or thinner to clean the projector
case. These can cause the case to warp and make the coating finish peel off.
Do not rub the lens or the EPSON cinema filter with harsh materials or subject them
to shocks, as they can easily become damaged.