Epson EMP-30, User Manual

Page: 40 / 68

When the Indicators Provide No Help
38
Has the computer been set for dual display?
(When connected to a computer) If dual display has been activated in the Display
Properties of the connected computer's Control
Panel, the projector will only display about half of
the image on the computer screen. To display the
whole of the image on the computer screen, turn off
the dual display setting. Refer to the video driver
manual for the computer's monitor for further
details.
Condition
The image colours are not right
Probable cause Remedy
Has the image brightness been adjusted
correctly?
Use the "Brightness" command to adjust.
"Video" - "Brightness" (p.20, 22)
Are the cables connected correctly?
Check that all cables that are required for projection
are connected correctly. (Setup Guide)
Are the image signal format settings correct?
If the "Input Signal" menu command is set to
"YCbCr" or "YPbPr" when a computer is connected,
the projected images will appear purplish.
If the "Input Signal" command is set to "RGB" when
a component video signal source is connected to the
projector, the images will appear greenish.
If a component video , RGB video or computer
source is connected to the projector, use the "Input
Signal" command to select the signal format which
matches the signal connected source.
"Video" - "Input Signal" (p.21, 22)
If a composite video or S-Video
source is
connected to the projector, use the "Video Signal"
command to select the video signal format.
"Video" - "Video Signal" (p.21)
Has the image contrast been adjusted
correctly?
Use the "Contrast" command to adjust.
"Video" - "Contrast" (p.20, 22)
Has the colour been adjusted correctly?
Use the "Color Adjustment" command to adjust the
contrast.
"Advanced" - "Color Adjustment" (p.24)
Have the colour intensity and tint been
adjusted correctly?
(The colours may not exactly match the colours in
the image on the computer screen or LCD screen,
but this is normal and is not the sign of a problem.)
Use the Video menu to adjust the Color and Tint
settings
"Video" - "Color", "Tint" (p.20, 21)
Is the lamp due for replacement?
When the lamp is nearly due for replacement, the
image will become darker and the colour quality
will become poorer.
When this happens, the lamp should be replaced
with a new one. (p.46)
The accessory EPSON cinema filter has
been removed from the lens, but the
"EPSON Cinema Filter" command in the
"Video" menu is still set to "ON". Change the "EPSON Cinema Filter" setting in the
"Video" menu to "OFF".
"Video" - "EPSON Cinema Filter" (p.20, 22)
Probable cause Remedy