Epson ELPMB26, User Manual

Page: 28 / 130

28
D
Secure the screw attached to the hook
using the M6 hexagon wrench. Put one of
the supplied screws into the screw hole
on the hook and secure it using the
hexagon wrench.
Fix the other three hooks in the same way,
by securing their screws.
Always use the screws supplied to secure the
projector and the projector plate.
Fitting the Projector Plate to the Ceiling Plate
A
Put the shaft of the projector plate into
the grooves of the ceiling plate and place
it securely in the horseshoe-shaped
points.
Do not release your hands from the
projector until mounting is complete.
B
Put the screws for the vertical angle
adjustment points that were removed
when removing the ceiling plate from the
projector plate in the screw holes.
Secure the two screws in the angle
adjustment points as shown in the left
illustration, using the supplied M8 hexagon
wrench to fix the projector. For details on
adjusting the angle of the projector, see the
next section "Adjusting the installation
angle".
Caution
Procedure
Secure the screws attached
to the hooks.
Put the supplied screws
through the screw holes and
secure them.
Secure the screws at the height of these
marks so that the projector is set up almost
horizontally. Use them as a guide.