Installing the Wall mount
57
b
Open the projector’s front cover, and then perform approximate focus adjustment using
the focus lever
c
Press the [Menu] button
Using the Remote Control
Using the Control Panel
d
Select
Screen Type
from the
Installation
menu to set the aspect ratio of the projected
image
e
Change the aspect ratio if necessary
Project images from a connected device, and then press the [Aspect] button on the remote control.
Each time you press the button, you see the aspect name on the screen and the aspect ratio changes.
c
The aspect ratio does not change when no images are being projected from the connected
device.
Summary of Contents for ELPHD02
