Epson ELPHD02 Installation Manual Download Page 22

Page: 22 / 142

Installing the Wall mount

Warning

Never open any cases on the projector.

Electrical voltages inside the projector can cause severe injury.

Do not look directly into the projector’s light source.

Possibly hazardous optical radiation emitted from this product. Eye injury may result.

Caution

Do not install this product in a location where the operating temperature for your projector
model may be exceeded.

Such an environment may damage the projector.

Install this product in a place free from excessive dust and humidity to prevent the lens or
optical components from becoming dirty.

Do not use excessive force when adjusting this product.

This product may break, resulting in personal injury.

This projector is a Class 1 laser product that complies with the IEC/EN60825-1: 2014
international standard for lasers.

Do not disassemble the projector when disposing of it.

Dispose according to your local or national laws and regulations.

Summary of Contents for ELPHD02















































































































































Search results

Summary of Contents for ELPHD02

Reviews:

Related manuals for ELPHD02

Brands by name

Popular brands

Epson ELPHD02, Installation Manual

Search results

Summary of Contents for ELPHD02

Reviews:

Related manuals for ELPHD02

Brands by name

Popular brands