Epson ELPHC100, User Manual

Page: 78 / 132

78
5
Press the sequence of buttons for all the steps you want the macro to perform. Each time you press a
button, the bottom of the screen flashes
Step 1
,
Step 2
, etc. Your macro can hold up to 190 steps.
Note
You can program delays into the macro by pressing the pause button. Each time you press the pause button, it
adds a one-half second delay.
6
When you’re done entering all the steps of the macro, press the
LIGHT
button on the side of the remote
control.
You see this screen:
7 Select one of the following:
•
SAVE
to save the macro
•
UNDO
to erase the last step of the macro and continue programming it
•
EXIT
to erase the whole macro and return to step 4 on page 77
8 When you’ve finished, press the
MAIN
button several times to return to normal operation.
Adding or Hiding Pages
Each device menu (DVD, CABLE, etc.) has eight pages or screens. The commands that are visible in each
menu occupy only a few of the pages, with the remaining pages being hidden. If necessary, you can add new
pages (to make them visible), or hide existing ones. You may also need to add a page in order to create space for
a new command or macro.
1
Press and hold both the
MAIN
and
ENT
buttons for approximately three seconds. The top of the screen
displays SETUP.
Note
You have 30 seconds to complete each step. After that, the remote control returns to normal operation.
2
Select the
EDIT
option.
MACRO
SAVE
UNDO
EXIT
SETUP
P-PRO
LEARN
EDIT
MACRO
FAV
1 OF 3
Select EDIT