Epson ELPHC100, User Manual

Page: 25 / 132

25
Using Other Playback Features
You can use the DVD menu on the remote control to access several other features while listening to a CD.
Note
Most functions in the remote control’s DVD menu are used only for playing DVDs. Only the ones listed below can be used
when playing CDs.
• To repeat the current track of a CD that you’re listening to, select
RPEAT
from the DVD menu. To repeat
the entire CD (or a programmed playlist), press
RPEAT
again. Press
RPEAT
a third time to cancel the
repeat function. Each time you select this option, the display changes as follows:
Repeat one
→
Repeat all
→
Repeat off
To repeat just part of a track, press
A<>B
at the beginning of the part you want to repeat, then press
A<>B
a second time to mark the end of the section. Press
A<>B
a third time to cancel the repeat function.
• To play all the tracks on your CD in a random order, press the stop button if the CD is currently
playing. Select
SHUFF
(Shuffle) from the DVD menu, then press the play button. After all the tracks
finish playing, the DVD player stops and the shuffle function is cancelled. To cancel shuffle mode while
random playback is in progress, press the stop button, then press
SHUFF
.
• You can play up to 21 tracks in any desired order by creating a playlist. To create a playlist, you need to
lower the screen and turn on the projector. Also, press the stop button if the CD is currently playing.
Once the projector is turned on, select
MEMO
(Memory) from the DVD menu on the remote control.
You see this screen:
Select the desired track number on the left, using the
u
or
d
button on the remote control. Then highlight
ADD
, using the
r
button, and press
SEL
(Select). The track number is added to the list on the right.
Repeat for any additional tracks you want to add.
To insert a track at an earlier point in the list, highlight the track in the playlist prior to the point where
you want to insert the new track. Then select the desired track number on the left and select
INSERT
. Use
DELETE
to erase a track, or
CLEAR
to erase the whole list.
Once you’ve finished creating your playlist, highlight
PLAY
and press
SEL
(Select) to start playback. The
playlist is retained until you remove the CD or turn off the player. To resume normal playback without the
playlist, press the stop button, then press play.
01
05
11
13
ADD
PROGRAM LIST TRACK
[15]
DELETE
PLAY
CLEAR
Select desired
track number
Playlist
Total tracks on disc