Epson ELPHC100, User Manual

Page: 75 / 132

75
Advanced Remote Control Setup
You can change the behavior of your remote control by editing device names (menu screen titles), editing
command names, creating macros, adding or hiding menu pages, and setting up “punch through” commands
(rarely used). See these sections:
• “Editing Device Names and Commands” below
• “Setting Up Macros” on page 77
• “Adding or Hiding Pages” on page 78
• “Erasing Learned Buttons and Macros” on page 79
• “Using Remote Control Punch-Through” on page 80
Editing Device Names and Commands
Each type of device (DVD, CABLE, etc.) has its own menu with commands listed on multiple pages. You can
customize the name of the device (which is also the name of the menu) or any command listed in the menu. If
you are adding a new command from another remote control (see page 72) or creating a macro (see page 77),
you’ll first need to add the command name to a blank space in the menu, as described below. If there isn’t a
space already, you’ll need to add a blank page (see “Adding or Hiding Pages” on page 78).
1
Press and hold both the
MAIN
and
ENT
buttons for approximately three seconds. The top of the screen
displays SETUP.
Note
You have 30 seconds to complete each step. After that, the remote control returns to normal operation.
2
Select the
EDIT
option.
The top of the screen changes to EDIT:
3 Select the
TEXT
option.
Note
The PAGE option is for hiding or adding pages. See “Adding or Hiding Pages” on page 78.
SETUP
P-PRO
LEARN
EDIT
MACRO
FAV
1 OF 3
Select EDIT
EDIT
TEXT
PAGE
EXIT
Select TEXT