Epson EL 486UC, User Manual

Page: 36 / 132

Using Other Shadow Options
Eight additional shadow options are available, allowing you to
shadow 16KB at the memory address listed on the screen. You
may want to enable one or more of these shadow options if you
are using option cards that contain ROM. Using these options,
you can shadow the memory on the card to your system’s RAM
or external cache (if one is installed). Check the documentation
that came with your option card to determine which addresses
your option card can access. You may also need to set some
switches or jumpers on your option card.
If you enable the
Memory
Remapping
option, you cannot
enable the last four of these
Shadow
options because they
access the same memory addresses.
Exiting the SETUP Program
When you leave the SETUP program, you can save your
settings and reboot your system, or exit SETUP without saving
your settings. You can also return all values to the factory
defaults.
To leave the SETUP program, press
E
SC
from any SETUP
screen. From the SETUP exit menu, press these keys to perform
the following functions:
Esc
F4
Returns to the SETUP utility
Saves the changes you have made to your
configuration and restarts your computer
F5
Supplies the factory default values for all SETUP
options
F6
Exits the SETUP utility and returns to the system
prompt without saving any changes.
1-20 Setting
Up
Your System