Epson EH-TW7000 User Manual Download Page 80

Page: 80 / 112

Troubleshooting

Check

Remedy

Are the lamp cover and lamps installed cor-
rectly?

If the lamp or lamp cover is installed incorrectly, the projector
cannot be turned on. Check how it is installed.

p.87

Problems with the remote control

The remote control does not respond

Check

Remedy

Is the remote control light-emitting area
pointing towards the remote receiver on the
projector during operation?

Point the remote control towards the remote receiver. Also,
check the operating range.

p.24

Is the remote control too far from the projec-
tor?

Check the operating range.

p.24

Is direct sunlight or strong light from fluores-
cent lamps shining onto the remote receiver?

Set the projector up in a location where strong light does not
shine onto the remote receiver.

Are the batteries dead or have the batteries
been inserted correctly?

Make sure the batteries are inserted correctly or replace the bat-
teries with new ones if necessary.

p.24

Problems with the control panel

Cannot make settings on the control panel

Check

Remedy

Control Panel Lock

set to

Full Lock

Par-

tial Lock

When

Control Panel Lock

is set to

Full Lock

in the Configura-

tion menu, all button operations on the control panel are disa-
bled; when

Partial Lock

is set, only the standby button on the

control panel is available. Perform operations from the remote
control.

Settings

Lock Setting

Control Panel Lock

p.62

Problems with 3D

Cannot project correctly in 3D

Check

Remedy

Are the 3D Glasses turned on?

Turn on the 3D Glasses.

Are the 3D Glasses fully charged?

Charge the 3D Glasses.

Is a 3D image being projected?

If the projector is projecting a 2D image, or if an error occurs on
the projector that prevents the 3D image from being projected,
you cannot view 3D images even if you are wearing the 3D
Glasses.

Is the input image in 3D?

Check that the input image is 3D compatible.
Since most TV broadcasts do not contain a 3D format signal, 3D
reception must be set manually.

Summary of Contents for EH-TW7000

















































































































Search results

Summary of Contents for EH-TW7000

Reviews:

Related manuals for EH-TW7000

Brands by name

Popular brands

Epson EH-TW7000, User Manual

Search results

Summary of Contents for EH-TW7000

Reviews:

Related manuals for EH-TW7000

Brands by name

Popular brands