DLQ-3000+
Rev. A
1-38
Paper feed function
Table 1-32 shows the button operations and the corresponding paper feed functions
.
Table 1-32. Paper Feed Functions
Operations
Function
Paper loaded
Paper out
Press LF/FF
Friction feed
Line feed
Load a sheet *².
shortly.
Tractor feed
Line feed *¹
Load continuous paper
Press LF/FF for
Friction feed
Form feed
Load a sheet *².
a few seconds.
Tractor feed
Form feed *¹
Load continuous paper
Press.
Friction feed
Eject
Load a sheet *².
Load/Eject
Tractor feed
Paper park*¹
Load continuous paper
Press
.
Friction feed
Micro feed (forward)
—
Tractor feed
Micro feed (forward) *³
—
Press
.
Friction feed
Micro feed (backward)
—
Tractor feed
Micro feed (backward)*³
—
Insert a sheet to the manual
insertion slot. (Friction feed)
—
Load the inserted sheet.
*².
Notes)
1. When the printer is in the tear-off state, these functions are performed after returning from
the tear-off position.
2. Once a sheet is manually inserted, the printer enters manual insertion mode. While the
mode is active, even if data is remaining in the buffer, the printer goes into a paper-out
error state at each end of a sheet and waits for the next sheet to be inserted. CSF
insertion is enabled again by loading sheets into the CSF or by initializing the printer.
3.
and
buttons are used as described below:
Pressing the button continuously feeds paper forward*/backward* with a increment
of 1/180 inch.
Pressing the button continuously feeds paper forward*/backward* slowly.
When the printer is in the tear-off state, these buttons are used to adjust tear-off
position. The adjusted position is stored in the EEPROM.
* To feed forward or backward means toward the front or rear of the printer,
respectively.
Tear -off function
The printer has 2 types of tear-off functions; manual tear-off and auto tear-off. The
manual tea-off is performed by pressing the Tear Off button . The auto tear-off is enabled
by SelecType. These functions are same as for the conventional EPSON printers.
Paper select function
Press the Paper Select button to select one of the following paper memory numbers.
0:
All
cases
a(9):
When the printer has the special paper information.
Note: The Paper Select button is only effective without any paper set.
Summary of Contents for DLQ-3000+
