Epson Disc Producer PP-100 User Manual Download Page 61

Page: 61 / 151

Publishing Discs

Loading Discs

This section describes how to load discs into the input stacker, and insert it.

Fully separate the discs to prevent them from sticking together.

Open the disc cover.

For precautions when you open the disc cover, see

“Opening the Disc Cover” on page 21

Take out the input stacker and load the discs into it.

The stacker to use as the input stacker differs depending on the product model and the set publish mode.
Confirm the input stacker in the following table.

For PP-100II/PP-100/PP-100AP

Load the discs into a stacker. Do not load discs in the drives or printer. Furthermore, with

the PP-100II or

PP-100, do not load discs between Drive 1 and Drive 2. They may become

unable to be removed.

•

Be sufficiently careful not to scratch a disc.

•

If a long time elapses after discs are loaded in the stacker, the separated discs may

stick together again. Fan the discs again if a long time has elapsed since they were

loaded.

•

Do not load discs above the red line on the stacker. The product may malfunction, or

the discs may be damaged.

•

Make sure that the bottom of the stacker is not dirty before loading the discs.

Publish Mode

Input Stacker

Number of Discs

Standard Mode

Stacker 1

Up to approximately 50 discs

External Output Mode

(Different types of discs can be loaded into Stacker 1

and Stacker 2.)

Stacker 1

Up to approximately 50 discs

Stacker 2

Up to approximately 50 discs

Batch Mode

Stacker 1

Up to approximately 50 discs

Stacker 2

Up to approximately 50 discs

Place the label surface facing upwards.

Summary of Contents for Disc Producer PP-100
























































































































































Search results

Summary of Contents for Disc Producer PP-100

Reviews:

Related manuals for Disc Producer PP-100

Brands by name

Popular brands

Epson Disc Producer PP-100, User Manual

Search results

Summary of Contents for Disc Producer PP-100

Reviews:

Related manuals for Disc Producer PP-100

Brands by name

Popular brands