Epson Disc Producer PP-100 User Manual Download Page 115

Page: 115 / 151

115

Troubleshooting

Error Associated with Disc Transfer

Lights

Conditions/Remedies

Power

BUSY

ERROR

INK

STACKER

Disc pick error

Resolve the problem as follows.

1. Open the disc cover and fully separate the

discs in the input stacker to prevent them from

sticking together.

2. Close the disc cover and retry to publish a

disc.

Multiple feed error

Resolve the problem as follows.

1. Open the disc cover.

2. Remove all the discs from both the drive tray

and the printer tray.

3. Fully separate the discs in the input stacker to

prevent them from sticking together.

4. Close the disc cover and retry to publish a

disc.

Do not turn on/off the product without removing

the discs. The product may be damaged.

Summary of Contents for Disc Producer PP-100
























































































































































Search results

Summary of Contents for Disc Producer PP-100

Reviews:

Related manuals for Disc Producer PP-100

Brands by name

Popular brands

Epson Disc Producer PP-100, User Manual

Search results

Summary of Contents for Disc Producer PP-100

Reviews:

Related manuals for Disc Producer PP-100

Brands by name

Popular brands