55
Publishing Discs
Flow for Publishing Discs
This section describes how to publish discs using the product.
The publishing procedure differs, depending on whether you publish with EPSON Total Disc Maker or with other
applications.
When publishing with EPSON Total Disc Maker
•
If you publish a large number of discs, first publish one disc and check the write result
and print result.
•
When the product is used for the first time, after it has been stored for a long time, or
after an error occurs, missing dots or ink stains may appear and print quality may be
reduced on rare occasions. When publishing multiple discs, publish one disc in
advance and check that there are no missing dots. If any dots are missing, perform
head cleaning. (See
“Cleaning the Print Head” on page 87
.)
•
If writing and printing are performed separately, performing writing before printing is
recommended. If writing is performed after printing, ink may cause discs to stick to
each other and result in a disc transport error, or dirt, stains, or scratches on discs may
result in a write error.
Selecting Publish Mode
Select publish mode. (See
page 57
.)
Loading Discs
Load discs into the product. (See
page 61
.)
EPSON Total Disc Maker
Registering Write Data
(only for PP-100II/PP-100/PP-50)
Creating Label
Create a label design. (See
page 65
.)
Publishing Discs
Publish a job to the product. (See
page 66
.)
Taking out Discs
Take out published discs. (See
page 71
.)
Register data to be written onto discs. (See
page 63
.)