24
Maintaining Your All-in-One
11. Hold the scanner while you release the support. Then close the scanner.
Caution:
Do not try to close the scanner without releasing the support, or you might
damage the CX4400 Series.
12. Press the
y
Stop
button to begin charging the ink. This takes about one and
a half minutes. When it’s finished, the
P
On
light stops flashing and remains
on, and the
B
ink light goes out.
Caution:
Never turn off the CX4400 Series while the
P
On
light is flashing or you’ll waste
ink. If the
B
ink light flashes, press the
y
Stop
button and press down all the
cartridges securely.
Note:
If you replaced a cartridge while copying a document or photo, cancel printing and
make sure your original is still placed correctly on the document table. Then copy
your original again.
CX4400_qg.book Page 24 Friday, May 4, 2007 10:09 AM
