8
Assembling the Printer
R4C4450 Setup G.
Rev. C
A5 size
SAFETY.FM
7/18/00
Pass 0
L
Proof Sign-off:
ABE K.Tsuno H.Kimura_______
H.Kimura
_______
ABE J.Holmes
_______
2. While holding the expansion tray vertically, insert the left leg
into the MP tray until the pin clicks into place in the hole on
the MP tray.
Installing the Face-Up Tray
Install the face-up tray onto the left side of the printer as follows:
1. Locate the output slot on the left side of the printer.
2. Squeeze the metal spring on the right side of the face-up tray
so that the end of the spring is folded down against the tray
as shown below.
