manualshive.com logo in svg

Epson C11CK60201, User Manual

The Epson C11CK60201 is a versatile printer designed to meet all your printing needs. With its user-friendly interface, you'll have no trouble navigating through its features. For assistance, don't worry! We've got you covered with a comprehensive user manual. Download it for free from manualshive.com and unleash the full potential of your Epson printer.

Share
Download
background image

322

• Do not spill liquid on the product or use the product with wet hands.

• Do not use aerosol products that contain flammable gases inside or around the product. Doing so may

cause fire.

• Do not press too hard on the scanner glass when placing originals.

• Do not open the scanner section while the product is copying, printing, scanning, or performing any

other functions.

• Be careful not to trap your fingers when closing the scanner unit.

• Except as specifically explained in your documentation, do not attempt to service or disassemble the

product yourself.

• Unplug the product and refer servicing to qualified service personnel under the following conditions: if

the power cord or plug is damaged; if liquid has entered the product; if the product has been dropped
or the case damaged; if the product does not operate normally or exhibits a distinct change in
performance. Adjust only those controls that are covered by the operating instructions.

• Leave the ink cartridges installed. Removing the cartridges can dehydrate the print head and may

prevent the product from printing.

• Before transporting the product, make sure that the print head is in the home (far right) position and

the ink cartridges are in place.

• Before transporting the product, make sure that the print head is in the home (far right) position.

• When storing or transporting the product, do not tilt it, stand it on its side, or turn it upside down;

otherwise, ink may leak.

Parent topic:

Important Safety Instructions

LCD Screen Safety Instructions

• Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers.

• If the LCD screen is damaged, contact Epson. If the liquid crystal solution gets on your hands, wash

them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush them
immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor
immediately.

• Do not press too hard on the LCD screen or subject it to heavy impacts.

• Do not use a pointy or sharp object, such as a pen or your fingernail, to operate the LCD screen.

• If the LCD screen chips or cracks, do not touch or attempt to remove the broken pieces; contact Epson

for support.

Summary of Contents for C11CK60201













































































































































































































































































































































Reviews:

No comments

Related manuals for C11CK60201

Canon BJC-S530D Quick Start Manual preview
BJC-S530D
Brand: Canon Pages: 96
Canon BJC-S500 Setup Instructions preview
BJC-S500
Brand: Canon Pages: 2
Canon BJC-S300 Setup Instructions preview
BJC-S300
Brand: Canon Pages: 2
Canon BJC-80 Specification preview
BJC-80
Brand: Canon Pages: 2
Canon BJC-6000 Series Setup Instructions preview
BJC-6000 Series
Brand: Canon Pages: 10
Canon BJC-55 Series Specification preview
BJC-55 Series
Brand: Canon Pages: 2
Canon BJC-5100 Series Technical Information preview
BJC-5100 Series
Brand: Canon Pages: 2
Canon BJC-50 Parts Catalog preview
BJC-50
Brand: Canon Pages: 4
Canon BJC-4400 Series Quick Start Manual preview
BJC-4400 Series
Brand: Canon Pages: 15
Canon BJC-3000 Series Quick Start Manual preview
BJC-3000 Series
Brand: Canon Pages: 8
Canon BJC-3000 Series Technical Information preview
BJC-3000 Series
Brand: Canon Pages: 2
Canon BJC-2100 Series Quick Start Manual preview
BJC-2100 Series
Brand: Canon Pages: 9
Canon BJC S600 Setup Instructions preview
BJC S600
Brand: Canon Pages: 11
Canon BJC-2100 Series Simplified Manual preview
BJC-2100 Series
Brand: Canon Pages: 9
Canon BJC-55 Series Service Manual preview
BJC-55 Series
Brand: Canon Pages: 206
Canon 900D - i Color Inkjet Printer Printing Manual preview
900D - i Color Inkjet Printer
Brand: Canon Pages: 30
Canon 8996A001 - i 455 Color Inkjet Printer Printing Manual preview
8996A001 - i 455 Color Inkjet Printer
Brand: Canon Pages: 4
Canon 820D - S Color Inkjet Printer Application Manual preview
820D - S Color Inkjet Printer
Brand: Canon Pages: 140

Brands by name

Popular brands

Load more brands