manualshive.com logo in svg

Epson C11CJ81201, User Manual

Share
Download
Epson C11CJ81201 User Manual Download Page 94

❏

Your computer operating system name and version

❏

Names and versions of the software applications you normally use with your product

Note:

Depending on the product, the dial list data for fax and/or network settings may be stored in the
product’s memory. Due to breakdown or repair of a product, data and/or settings may be lost. Epson
shall not be responsible for the loss of any data, for backing up or recovering data and/or settings even
during a warranty period. We recommend that you make your own backup data or take notes.

Help for Users in Europe

Check your Pan-European Warranty Document for information on how to contact Epson support.

Help for Users in Singapore

Sources of information, support, and services available from Epson Singapore are:

World Wide Web

http://www.epson.com.sg

Information on product specifications, drivers for download, Frequently Asked Questions (FAQ),
Sales Enquiries, and Technical Support via e-mail are available.

Epson Helpdesk

Toll Free: 800-120-5564

Our HelpDesk team can help you with the following over the phone:

❏

Sales enquiries and product information

❏

Product usage questions or problem troubleshooting

❏

Enquiries on repair service and warranty

Help for Users in Vietnam

Contacts for information, support, and services are:

LQ-780/LQ-780N     User’s Guide

Where To Get Help     

94

Summary of Contents for C11CJ81201































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands