manualshive.com logo in svg

Epson C11CJ81201, User Manual

Share
Download
Epson C11CJ81201 User Manual Download Page 43

from the sheet guide

* guide mark

Switching Between Continuous Paper and Single Sheets

When using the tractor, you can easily switch between continuous paper and single sheets
(including envelopes or postcards) without removing the continuous paper from the tractor.

Switching to single sheets

Follow these steps to switch from continuous paper to single sheets:

1. When the Auto tear off function is turned on, the printer advances the paper to the tear off

position automatically.

2. Tear off the printed pages.

!

Caution:

❏

Always tear off paper before feeding it backwards; feeding too many sheets backwards
can cause a paper jam.

❏

Never feed labels backward using the 

Load/Eject

 button. Labels can easily peel off their

backing and jam the printer. For information on removing labels from the paper path,
see “To tear off and eject labels” on page 40.

3. Press the 

Load/Eject

 button to feed the continuous paper back to the standby position. The

paper is still attached to the tractor, but is no longer in the paper path.

4. Set the paper release lever to the single-sheet feeding position.

LQ-780/LQ-780N     User’s Guide

Paper Handling     

43

Summary of Contents for C11CJ81201































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands