manualshive.com logo in svg

Epson C11CJ81201, User Manual

Share
Download
Epson C11CJ81201 User Manual Download Page 7

About This Manual

Where to Find Information

The following manuals are supplied with your Epson printer.

Start Here

 

(paper manual)

Provides information on setting up the printer and installing the software.

User’s Guide

 

(this manual)

Provides overall information and instructions on using the printer.

Network Guide

 (

 

LQ-780N

 only)

Provides network information on management and printer settings.

Descriptions Used in this Manual

❏

Screenshots of the printer software screens are from Windows 10 unless otherwise specified.
The content displayed on the screens varies depending on the model and situation.

❏

Illustrations of the printer used in this manual are examples only. Although there may be slight
differences depending on the model, the method of operation is the same.

Operating System Versions

Regarding the operating systems, the explanations in this manual are mainly for Windows users
and terms such as "Windows 11", "Windows 10", "Windows 8.1", "Windows 8", "Windows 7",
"Windows Vista", "Windows XP", "Windows Server 2022", "Windows Server 2019", "Windows
Server 2016", "Windows Server 2012 R2", "Windows Server 2012", "Windows Server 2008 R2",
"Windows Server 2008", "Windows Server 2003 R2", and "Windows Server 2003" refer to the
following operating system. Additionally, "Windows" is used to refer to all versions.

❏

Microsoft

®

 Windows

®

 11 operating system

❏

Microsoft

®

 Windows

®

 10 operating system

❏

Microsoft

®

 Windows

®

 8.1 operating system

LQ-780/LQ-780N     User’s Guide

About This Manual     

7

Summary of Contents for C11CJ81201































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands