manualshive.com logo in svg

Epson C11CJ81201, User Manual

Share
Download
Epson C11CJ81201 User Manual Download Page 121

Roll paper

A:

The minimum top margin is 4.2 mm
(0.17 inch).

B:

The minimum left margin is 3.0 mm
(0.12 inch).
The minimum right margin is 3.0 mm
(0.12 inch).
The maximum printable width is
269.24 mm (10.6 inches).

System Requirements

Windows 11/Windows 10 (32-bit, 64-bit)/Windows 8.1 (32-bit, 64-bit)/Windows 8 (32-bit, 64-bit)/
Windows 7 (32-bit, 64-bit)/Windows Vista (32-bit, 64-bit)/Windows XP SP3 or later (32-bit)/
Windows XP Professional x64 Edition SP2 or later/Windows Server 2022/Windows Server 2019/
Windows Server 2016/Windows Server 2012 R2/Windows Server 2012/Windows Server 2008 R2/
Windows Server 2008/Windows Server 2003 R2/Windows Server 2003 SP2 or later

Standards and Approvals

!

Warning:

❏

This is a Class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.

❏

The connection of a non-shielded printer interface cable to this printer will invalidate the
EMC standards of this device.

❏

You are cautioned that changes or modifications not expressly approved by Seiko Epson
Corporation could void your authority to operate the equipment.

Safety approvals

Safety

IEC60950-1, IEC62368-1

LQ-780/LQ-780N     User’s Guide

Product Information     

121

Summary of Contents for C11CJ81201































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands