Sending Many Pages of a Monochrome Document (Direct Send)
When sending a fax in monochrome, the scanned document is temporarily stored in the printer's memory.
Therefore, sending a lot of pages may cause the printer to run out of memory and stop sending the fax. You can
avoid this by enabling the
Direct Send
feature, however, it takes longer to send the fax because the printer
performs scanning and sending simultaneously. You can use this feature when there is only one recipient.
1.
Place the originals.
2.
Select
Fax
on the home screen.
To select an item, use the
u
d
l
r
buttons, and then press the OK button.
3.
Specify the recipient.
4.
Select the
Fax Settings
tab, and then select
Direct Send
to set this to
On
.
You can also make settings such as the resolution and the sending method as necessary.
5.
Send the fax.
Related Information
&
“Placing Originals” on page 58
&
“Sending Faxes Automatically Using the Control Panel” on page 139
&
Sending Faxes in Monochrome at Specified Time of the Day (Send Fax Later)
You can set to send a fax at a specified time. Only monochrome faxes can be sent when the time to send is
specified.
1.
Select
Fax
on the home screen.
To select an item, use the
u
d
l
r
buttons, and then press the OK button.
2.
Specify the recipient.
3.
Select the
Fax Settings
tab, and then select
Send Fax Later
.
4.
Select the
Send Fax Later
field to set this to
On
.
5.
Select the
Time
field, enter the time you want to send the fax, and then select
OK
.
6.
Select
Done
to apply the settings.
You can also make settings such as the resolution and the sending method as necessary.
>
Sending Faxes Using the Printer
>
142
