background image

The computers on a network can share a printer that is directly connected to one of them. The
computer that is directly connected to the printer is the printer server, and the other computers are the
clients which need permission to share the printer with the printer server. The clients share the printer
via the printer server.

According to the versions of Windows OS and your access rights on the network, perform the
appropriate settings of the printer server and clients.

See “Setting up your printer as a shared printer” on page 76.

See “Setting for the clients” on page 80.

Note:

When sharing the printer, be sure to set EPSON Status Monitor 3 so that the shared printer can be
monitored on the printer server and clients. See “Setting up EPSON Status Monitor 3” on page 69.

When connecting to a shared printer beyond a router, error and warning notification for shared
printers during printing is not available in some cases because of the router’s settings.

The printer server and clients should be set on the same network system, and they should be under the
same network management beforehand.

Setting up your printer as a shared printer

Follow these steps to set the printer server.

Note:

You must access as the Administrators of the local machine.

1. For Windows 10/Windows Server 2016:

Right-click the 

Start

 menu, click 

Control Panel

, and then click 

View devices and printers

 from

the 

Hardware and Sound

 category.

For Windows 8.1/Windows 8/Windows Server 2012 R2/Windows Server 2012:
Click 

Desktop

 on the 

Start

 screen, move the cursor to the top-right corner of the screen. Click

Settings

, and then click 

Control Panel

. Next, click 

View devices and printers

 from the

Hardware and Sound

 category.

For Windows 7/Windows Server 2008 R2:
Click 

Start

, and then click 

View devices and printers

.

LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN     User’s Guide

Printer Software     

76

Summary of Contents for C11CF39201







































































































































































Reviews: