Auto tear-off wait time
You can select the time from the point printing finished until the paper moves to the tear-off position
for continuous printing. This setting is available when the auto tear-off function is set to on.
Auto line feed
When auto line feed is on, the printer accompanies each carriage return (CR) code received with a line
feed code. Set this to
On
if printing might continue without line feeding depending on the OS or the
applications used.
Note:
Set to
Off
when printing from Windows, otherwise a blank line is inserted between the lines.
Print direction
You can select auto print direction (
Auto
), bidirectional printing (
Bi-D
), or unidirectional printing
(
Uni-D
). Printing is normally bidirectional for faster printing; however, unidirectional printing
allows for precise vertical printing alignment.
When print direction is set to
Auto
, the printer analyzes the data, and then switches automatically
whether to use
Bi-D
or
Uni-D
.
Note:
Set to
Bi-D
when printing from Windows to enable the printer driver's print direction setting. When
Uni-D
or
Auto
is selected, the printer ignores the command from the Windows driver.
Software
When you select
ESC/P2
the printer operates in the Epson ESC/P mode. When you select
IBMPPDS
,
the printer emulates an IBM
®
printer.
0 slash
The zero character has a slash ( ) when this feature is turned on. It has no slash (0) when this feature is
turned off. The slash allows you to easily distinguish between the uppercase letter
O
and a zero.
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User’s Guide
Control Panel
95
