manualshive.com logo in svg

Epson C11CF39201, User Manual

Share
Download
Epson C11CF39201 User Manual Download Page 156

Font selection:
DC2, ESC P, ESC :, ESC E, ESC F, ESC I, ESC [d, ESC [I

Font enhancement:
DC4, SO, ESC SO, ESC W, ESC [ @, SI, ESC SI, ESC G, ESC H, ESC T, ESC S, ESC -, ESC _, ESC [-

Spacing:
BS, SP

Character handling:
ESC 6, ESC 7, ESC [ T, ESC ^, ESC \

Bit image:
ESC K, ESC L, ESC Y, ESC Z, ESC [g, ESC * (AGM*

1

)

Bar code:
ESC [f, ESC [p

Download:
ESC = (command is not provided)

*

1

 Alternate Graphic Mode

Standards and Approvals

!

Warning:

❏

This is a Class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.

❏

The connection of a non-shielded printer interface cable to this printer will invalidate the EMC
standards of this device.

❏

You are cautioned that changes or modifications not expressly approved by Seiko Epson
Corporation could void your authority to operate the equipment.

LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN     User’s Guide

Product Information     

156

Summary of Contents for C11CF39201







































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands